Content
# #rancho-ynecita — 2026-01-06
**10:11 [Kevin](https://slack.com/archives/C09D358F91R/p1767723111023179):** Alright I'm on site and PC is firing up
**10:12 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767723176325479):** copy switching gears
**10:20 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767723638223999):** not online yet.. still booting?
**10:22 [Kevin](https://slack.com/archives/C09D358F91R/p1767723777808289):** Ok having issues still with comms.
**10:23 [Kevin](https://slack.com/archives/C09D358F91R/p1767723813944299):** This thing is not going down easy
**10:23 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767723821115939):** internet comms?
**10:23 [Kevin](https://slack.com/archives/C09D358F91R/p1767723831153229):** No site to site
**10:24 [Kevin](https://slack.com/archives/C09D358F91R/p1767723868256569):** The polling of sites will now be handled by the master RFScada board
**10:24 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767723874959929):** right.
**10:24 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767723892014049):** is the panel connected to the internet? i wanted to get set up and online with the PLC
**10:25 [Kevin](https://slack.com/archives/C09D358F91R/p1767723923424399):** It should be
**10:25 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767723939563709):** im not able to connect
**10:26 [Kevin](https://slack.com/archives/C09D358F91R/p1767723968047249):** Yeah something funny going on
**10:26 [Kevin](https://slack.com/archives/C09D358F91R/p1767724013191109):** Standby
**10:31 [Kevin](https://slack.com/archives/C09D358F91R/p1767724313315059):** Bad cable....this place is cursed man
**10:33 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767724412072129):** no way. crazy
**10:36 [Kevin](https://slack.com/archives/C09D358F91R/p1767724593950919):** I'm going to go to one of the other sites to grab the radio so I can do some more investigating.
**10:36 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767724612348539):** ok. i am connected now. let me know what i can do
**10:37 [Kevin](https://slack.com/archives/C09D358F91R/p1767724656793899):** You going to modify the Modbus polling?
**10:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767724666297029):** not exactly sure what i need to do
**10:38 [Kevin](https://slack.com/archives/C09D358F91R/p1767724721048599):** I modified the spreadsheet with new registers.
We are now just polling the master board for all the site data.
**10:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767724752610199):** thats right. let me take a look
**10:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767724762363109):** (you can tell already that its not working?)
**10:40 [Kevin](https://slack.com/archives/C09D358F91R/p1767724818428999):** The master to slave comm on the RFScada side is not working. But I also have the comms to the PLC disconnect so that won't work at the moment either
**10:41 [Kevin](https://slack.com/archives/C09D358F91R/p1767724866216309):** Going dark for a few. I'll be back
**10:41 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767724872257569):** copy
**11:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767726154973749):** K I'm back
**11:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767726162107529):** Setting up my test rif
**11:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767726165792219):** Rig
**11:04 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767726252263659):** ok
**11:46 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767728807715199):**
![[F0A78K2MJ1J_image.png]]
**11:47 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767728833028259):** am i understanding this correctly? we will read from a single device (ID=1?)
**11:47 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767728851555859):** and the DIs will be on register 0, 10,20,30 for example?
**11:47 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767728876742729):** AI/1 will be at register 1,11,21,31 (for the 4 sites)?
**12:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767731502567429):** also, hows it going out there?
**14:00 [Kevin](https://slack.com/archives/C09D358F91R/p1767736833791789):** Finally made some progress
**14:00 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767736856549229):** well thats good to hear
**14:06 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737190361339):** will you be ready for me to test anything soon?
**14:07 [Kevin](https://slack.com/archives/C09D358F91R/p1767737235417769):** Yes your assessment is correct. I will connect the PLC now. It will be best to switch to the 485 port again please
**14:07 [Kevin](https://slack.com/archives/C09D358F91R/p1767737249737269):** Btw I have data!!
**14:07 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737255355199):** this sounds promising!
**14:07 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737262652149):** let me switch gears.
**14:07 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737264032849):** standby
**14:12 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737567950889):** ok..
**14:12 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737577122679):** what is the node ID of the board we are reading from
**14:17 [Kevin](https://slack.com/archives/C09D358F91R/p1767737871565079):** 1
**14:18 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737884101789):** hm
**14:18 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737897467789):** can you confirm port settings
**14:18 [Kevin](https://slack.com/archives/C09D358F91R/p1767737914660479):** 4800 8n1
**14:19 [Kevin](https://slack.com/archives/C09D358F91R/p1767737969428459):** did you switch to the 485 port?
**14:19 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767737976498229):** ya
**14:21 [Kevin](https://slack.com/archives/C09D358F91R/p1767738084818039):** port settings right?
**14:22 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738124628829):**
![[F0A7JTCFFS5_image.png]]
**14:22 [Kevin](https://slack.com/archives/C09D358F91R/p1767738169426199):** let me try wire swap
**14:26 [Kevin](https://slack.com/archives/C09D358F91R/p1767738375181559):** let me try polling locally. standby
**14:28 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738506857459):** i was saving.. it took a logn time
**14:28 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738509063039):** its just now trying
**14:30 [Kevin](https://slack.com/archives/C09D358F91R/p1767738637036039):** it should work
**14:30 [Kevin](https://slack.com/archives/C09D358F91R/p1767738648799909):** I polled it locally with those settings. MB addr 1
**14:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738660532839):** are you near the hmi?
**14:31 [Kevin](https://slack.com/archives/C09D358F91R/p1767738682160759):**
![[F0A7JUSF9J5_image.png]]
**14:31 [Kevin](https://slack.com/archives/C09D358F91R/p1767738685059969):** yes
**14:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738700518859):** ok. im going to go online there
**14:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738716796529):** lets see whats happening.. update rates will be quicker for you.. that satellite internet is not good
**14:32 [Kevin](https://slack.com/archives/C09D358F91R/p1767738755919629):** I'm not connected to the hmi though
**14:33 [Kevin](https://slack.com/archives/C09D358F91R/p1767738783294179):** let me get eth setup
**14:35 [Kevin](https://slack.com/archives/C09D358F91R/p1767738950486299):** what's the pc's ip?
**14:36 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767738966107179):** do you need to remote into it? whats going on?
**14:36 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739003605989):** this connection is crazy slow
**14:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739043603639):** got disconnected
**14:37 [Kevin](https://slack.com/archives/C09D358F91R/p1767739054637909):** yes, I have to remote into it
**14:37 [Kevin](https://slack.com/archives/C09D358F91R/p1767739054822849):** nvmd
**14:38 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739081742529):** ok.. not important i was just wondering you could see the screen physically
**14:38 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739087479449):** we dont need you to remote in
**14:38 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739100437659):** but i think it lost internet
**14:38 [Kevin](https://slack.com/archives/C09D358F91R/p1767739128465039):** ugh, I thought you wanted to connect through my faster internet. let me reconnect it
**14:38 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739139320079):** oh!
**14:39 [Kevin](https://slack.com/archives/C09D358F91R/p1767739148338279):** you can remote into my pc
**14:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739148756499):** man yeah. if we can get it on starlink
**14:39 [Kevin](https://slack.com/archives/C09D358F91R/p1767739161189959):** do you want to remote into my pc?
**14:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739166415189):** sure
**14:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739182680709):** i was online with the PLC before i got disconnected tho
**14:40 [Kevin](https://slack.com/archives/C09D358F91R/p1767739241683209):** local user is not setup for rdp. go back to your old connection
**14:40 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739256222429):** did we get it on starlink somehow last time?
**14:41 [Kevin](https://slack.com/archives/C09D358F91R/p1767739298706559):** no
**14:41 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739309699589):** ok.. waiting for it to come back online
**14:42 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739342587339):** its working
**14:43 [Kevin](https://slack.com/archives/C09D358F91R/p1767739433864439):** I see one of your messages responding
**14:44 [Kevin](https://slack.com/archives/C09D358F91R/p1767739441991959):** ie TX light
**14:44 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739445322609):** yeah its working
**14:44 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739486323169):** got a little clean up work to do
**14:45 [Kevin](https://slack.com/archives/C09D358F91R/p1767739533026309):** also need to change a few registers as I had to make changes to make the repeater function work
**14:46 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739560524429):** ok. working over this connection is going to make things take a little longer
**14:46 [Kevin](https://slack.com/archives/C09D358F91R/p1767739605592309):** setup the SCADA user for remote desktop access, then you can connect through my machine
**14:47 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739665991269):** it says its already done
**14:47 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739666484419):**
![[F0A72LNCJBX_image.png]]
**14:48 [Kevin](https://slack.com/archives/C09D358F91R/p1767739685011099):** I had SCADA as the user.
**14:48 [Kevin](https://slack.com/archives/C09D358F91R/p1767739714288029):** I have to unplug the slow internet first though.
**14:48 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739723777089):** i dont need RDP if i can just run productivity from your laptop
**14:49 [Kevin](https://slack.com/archives/C09D358F91R/p1767739743157069):** ok.
**14:49 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739761259339):** let me sve the program
**14:49 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739762930249):** and go offline
**14:49 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739765055859):** before you unplug
**14:49 [Kevin](https://slack.com/archives/C09D358F91R/p1767739766473079):** copy
**14:50 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739817761979):** ok ready
**14:50 [Kevin](https://slack.com/archives/C09D358F91R/p1767739835464239):** ok
**14:51 [Kevin](https://slack.com/archives/C09D358F91R/p1767739867710079):** ok ready.
**14:51 [Kevin](https://slack.com/archives/C09D358F91R/p1767739874026849):** do you have my RUT?
**14:51 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767739879280399):** no
**14:52 [Kevin](https://slack.com/archives/C09D358F91R/p1767739963370149):** pw autosys
![[F0A6ZNLMVNX_image.png]]
**14:59 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740361364749):** should we be getting data from all 4?
**14:59 [Kevin](https://slack.com/archives/C09D358F91R/p1767740385282139):** No
**14:59 [Kevin](https://slack.com/archives/C09D358F91R/p1767740399187039):** And we need to do some register work
**15:00 [Kevin](https://slack.com/archives/C09D358F91R/p1767740408372399):** Bonita is offline
**15:00 [Kevin](https://slack.com/archives/C09D358F91R/p1767740422975179):** You probably only have the cistern
**15:00 [Kevin](https://slack.com/archives/C09D358F91R/p1767740426440159):** And caballo
**15:00 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740450462059):** yeah that looks right
**15:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767740562605749):** Estes New registers start at 40200. Except the outputs, which stay the same
**15:02 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740578451949):** oh
**15:03 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740583349009):** hm
**15:03 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740595110889):** i need coffee
**15:03 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740599161289):** haha
**15:03 [Kevin](https://slack.com/archives/C09D358F91R/p1767740626074299):** But, if we get cistern and caballo working then we can leave it for tonight
**15:04 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740693559849):** i need to figure out how to get more than 8 colors on rut
**15:04 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740695822799):** its really hard to see
**15:05 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740705174859):** the usually settings arent working
**15:06 [Kevin](https://slack.com/archives/C09D358F91R/p1767740762801099):** Do you want to come down tomorrow and finish this onsite?
**15:06 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740803811109):** if we cant get it to a good spot before youre ready to leave i will
**15:07 [Kevin](https://slack.com/archives/C09D358F91R/p1767740832166179):** Ok. We've got 2 hours of daylight so let's keep chugging
**15:07 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740868044349):** k.. help me understand the registers?
**15:08 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767740880446519):** 0-19 are good it sounds like
**15:09 [Kevin](https://slack.com/archives/C09D358F91R/p1767740953403679):** Estes and Bonita will be 40200 through 40219
**15:11 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741109825099):** they are offline you said?
**15:12 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741122188759):** wait still doesnt make sense.. we should just get zeros from node 1
**15:14 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741264766439):** are both estes and bonita offline?
**15:15 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741325698339):** do you think 15.64 is the cistern level?
**15:15 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741354046359):** oh never mind that looks like a raw
**15:18 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741495028069):** ok does 7.2 ft sound like a good cistern level?
**15:19 [Kevin](https://slack.com/archives/C09D358F91R/p1767741576307139):** Bonita for sure
**15:19 [Kevin](https://slack.com/archives/C09D358F91R/p1767741593712439):** I might have to go to Estes to program the board
**15:20 [Kevin](https://slack.com/archives/C09D358F91R/p1767741607055419):** Want me to do that?
**15:20 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741639563119):** do you know if the writes are going to work the same?
**15:20 [Kevin](https://slack.com/archives/C09D358F91R/p1767741651243359):** They should
**15:20 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741654318249):** ok
**15:21 [Kevin](https://slack.com/archives/C09D358F91R/p1767741669493879):** Yet to be proven
**15:22 [Kevin](https://slack.com/archives/C09D358F91R/p1767741730865229):** I see 7.37 ft on the tank level on SCADA! Should be close
**15:23 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741802336409):** seems reasonable?
**15:23 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741827664039):** making good progress..
**15:24 [Kevin](https://slack.com/archives/C09D358F91R/p1767741842235699):** We are cooking with gas now
**15:24 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741857442799):** need to figure out the writes now
**15:24 [Kevin](https://slack.com/archives/C09D358F91R/p1767741872377809):** Do Caballo first
**15:26 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767741997208519):** it looks like we were writing to 10 before?
**15:26 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742000808489):** i thought it was 90
**15:27 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742075308119):** theres a chance caballo is still lined up
**15:28 [Kevin](https://slack.com/archives/C09D358F91R/p1767742092993059):** Let me look at my spreadsheet real quick
**15:29 [Kevin](https://slack.com/archives/C09D358F91R/p1767742158135749):** Yes Caballo is 90
**15:30 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742240159329):** thats what i thought too but the msgs are are setup for 10
**15:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742284447859):** can you put caballo in manual?
**15:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742288596709):** do we have that capability?
**15:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742293558509):** scada manua;
**15:31 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742294727739):** l
**15:35 [Kevin](https://slack.com/archives/C09D358F91R/p1767742546241249):** You want scada manual?
**15:36 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742560517229):** if you can.. im trying it from bits
**15:36 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742563506669):** but i think its seeing a fault?
**15:36 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742568167269):** what does scada look like?
**15:36 [Kevin](https://slack.com/archives/C09D358F91R/p1767742611831149):** I just cleared the fault but no output on the board
**15:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742627164179):** caballo is the local board?
**15:37 [Kevin](https://slack.com/archives/C09D358F91R/p1767742631055069):** Yes
**15:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742631135409):** thats handy
**15:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742634141859):** ok
**15:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742635354309):** standby
**15:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742639100619):** let me change it to 90
**15:37 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742669955389):** try again
**15:38 [Kevin](https://slack.com/archives/C09D358F91R/p1767742710075209):** Your fail timer is real short
**15:38 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742725506369):** can you change it from scada?
**15:38 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742729090659):** would be. alot faster than the tags
**15:38 [Kevin](https://slack.com/archives/C09D358F91R/p1767742731488769):** Yes
**15:39 [Kevin](https://slack.com/archives/C09D358F91R/p1767742740840019):** I turned the FTS off
**15:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742744557199):** perfect
**15:39 [Kevin](https://slack.com/archives/C09D358F91R/p1767742756615629):** Ok it is called
**15:39 [Kevin](https://slack.com/archives/C09D358F91R/p1767742762357489):** No output
**15:39 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742768906679):** ok
**15:40 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742807572889):** can you see all 8 outputs?
**15:40 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742812807059):** did any of them light up?
**15:40 [Kevin](https://slack.com/archives/C09D358F91R/p1767742813330679):** Yes
**15:40 [Kevin](https://slack.com/archives/C09D358F91R/p1767742815920389):** No
**15:40 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742820562969):** ive tried 90 and 91
**15:40 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742824494819):** message is successful
**15:40 [Kevin](https://slack.com/archives/C09D358F91R/p1767742829691559):** It's bits
**15:40 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742854480189):** we used to have it set up to write the word.. and the bits in the word controlled the relays
**15:41 [Kevin](https://slack.com/archives/C09D358F91R/p1767742860443039):** There it goee
**15:41 [Kevin](https://slack.com/archives/C09D358F91R/p1767742863843059):** Goes
**15:41 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767742870826369):** thats weird
**15:41 [Kevin](https://slack.com/archives/C09D358F91R/p1767742876176669):** Big delay
**15:42 [Kevin](https://slack.com/archives/C09D358F91R/p1767742933391339):** Might be RFScada thing
**15:42 [Kevin](https://slack.com/archives/C09D358F91R/p1767742967358029):** You can bump up the comm cycle times on the 485 port
**15:43 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743006199099):** the timeout delay you mean?
**15:43 [Kevin](https://slack.com/archives/C09D358F91R/p1767743006895399):**
![[F0A6ZV7UK1R_pxl_20260106_234314107.jpg]]
**15:43 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743019096819):** a flow rate!
**15:43 [Kevin](https://slack.com/archives/C09D358F91R/p1767743023055329):** Yep
**15:43 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743025236539):** you should have pressure too
**15:44 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743053850369):** i just have 0-100 for all these instruments
**15:44 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743055193539):** we need scaling
**15:44 [Kevin](https://slack.com/archives/C09D358F91R/p1767743063995039):** No, but not worried about the psi for now
**15:44 [Kevin](https://slack.com/archives/C09D358F91R/p1767743070855879):** Yes for scaling
**15:45 [Kevin](https://slack.com/archives/C09D358F91R/p1767743120465879):** Actual flow is 197
**15:48 [Kevin](https://slack.com/archives/C09D358F91R/p1767743339460529):** I'm getting excited
**15:51 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743478320319):** modbus should be faster
**15:51 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743484113989):** im calculating scaling
**15:51 [Kevin](https://slack.com/archives/C09D358F91R/p1767743494069229):** Much better
**15:52 [Kevin](https://slack.com/archives/C09D358F91R/p1767743521148329):** I'm firing up old scada to get scaling
**15:52 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743525043969):** ok
**15:52 [Kevin](https://slack.com/archives/C09D358F91R/p1767743553028959):** 300 gpm
**15:52 [Kevin](https://slack.com/archives/C09D358F91R/p1767743574008799):** Psi 200
**15:53 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743600064709):** i have amps too
**15:53 [Kevin](https://slack.com/archives/C09D358F91R/p1767743607663269):** Cistern 0.1 to 34.7
**15:53 [Kevin](https://slack.com/archives/C09D358F91R/p1767743629513529):** Amps 100
**15:54 [Kevin](https://slack.com/archives/C09D358F91R/p1767743663750139):** Cistern batt volts 0.2 to 22
**15:54 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743669263639):** ok ill need to connect to VT scada to fix the PSI display
**15:54 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743674276199):** i thnk its looking at the wrong tag
**15:54 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743676597389):** i have good values int he PLC
**15:54 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743688722639):** whats next priority right now
**15:55 [Kevin](https://slack.com/archives/C09D358F91R/p1767743726405929):** Auto. I have no onscreen keyboard.
**15:55 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743753650589):** what can i do
**15:56 [Kevin](https://slack.com/archives/C09D358F91R/p1767743769016029):** Let me plug in a keyboard
**15:59 [Kevin](https://slack.com/archives/C09D358F91R/p1767743972315849):**
![[F0A74BSV69L_pxl_20260106_235918242.jpg]]
**15:59 [Kevin](https://slack.com/archives/C09D358F91R/p1767743994857739):** This is great!
**15:59 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743999093419):** is that good?
**15:59 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767743999917619):** haha
**16:00 [Kevin](https://slack.com/archives/C09D358F91R/p1767744016705869):** Totals are working
**16:00 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744020228019):** excellent
**16:00 [Kevin](https://slack.com/archives/C09D358F91R/p1767744045024259):**
![[F0A7KAZR8EM_pxl_20260107_000032483.jpg]]
**16:01 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744066615629):** making sense? pump is filling it?
**16:01 [Kevin](https://slack.com/archives/C09D358F91R/p1767744071873139):** Yep
**16:01 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744081944149):** this all sounds like good stuff
**16:01 [Kevin](https://slack.com/archives/C09D358F91R/p1767744093000889):**
![[F0A730R0EG5_pxl_20260107_000122514.mp.jpg]]
**16:01 [Kevin](https://slack.com/archives/C09D358F91R/p1767744101788489):** The size is perfect
**16:02 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744129437359):** of the graphics on the screen?
**16:02 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744135729079):** or the size of the screen itself
**16:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767744136299399):** Yes
**16:02 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744138948409):** excellent!
**16:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767744140767009):** Both
**16:02 [Kevin](https://slack.com/archives/C09D358F91R/p1767744166934529):** I'm gonna go program Estes
**16:03 [Kevin](https://slack.com/archives/C09D358F91R/p1767744181661349):** Do you want the slow Internet back?
**16:03 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744186510319):** yes
**16:03 [Kevin](https://slack.com/archives/C09D358F91R/p1767744226252019):** Can I unplug my PC eth?
**16:03 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744231286889):** yes
**16:03 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744236380239):** i logged off
**16:04 [Kevin](https://slack.com/archives/C09D358F91R/p1767744261779719):** Ok slow Internet is back
**16:05 [Kevin](https://slack.com/archives/C09D358F91R/p1767744322698329):** Going to Estes. I'll be dark for a few
**16:05 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767744329796439):** copy
**16:23 [Kevin](https://slack.com/archives/C09D358F91R/p1767745406770229):** You should have Estes data
**16:23 [Kevin](https://slack.com/archives/C09D358F91R/p1767745433245139):** I am at Estes so we can test if you want
**16:24 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767745440335599):** working on it
**16:24 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767745441873449):** standby
**16:24 [Kevin](https://slack.com/archives/C09D358F91R/p1767745461472879):** Copy
**16:27 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767745657295849):** slow.
**16:27 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767745658745039):** waiting
**16:32 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767745964281119):** cistern doesnt seem to be coming through anymore
**16:33 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767746005090969):** we coudl overflow the tank like this . i need to figure out comm fail in this new configuration
**16:34 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767746063437449):** and no data from estes
**16:34 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767746069526899):** only thing we are getting is caballo
**16:40 [Kevin](https://slack.com/archives/C09D358F91R/p1767746408408949):** Still?
**16:41 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767746474739609):** still only caballo
**16:42 [Kevin](https://slack.com/archives/C09D358F91R/p1767746520301369):** I'm heading back
**16:49 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767746996129389):** i can head out there tomorrow.. it would be a lot easier to test and clean up the code. do you still need to program/experiment with the rfscada boards?
**16:50 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747001140069):** what state can we leave this in tonight?
**16:50 [Kevin](https://slack.com/archives/C09D358F91R/p1767747057488579):** Do you have cistern comms back? It appears to be on the plc end of there is a problem
**16:52 [Kevin](https://slack.com/archives/C09D358F91R/p1767747140760299):** If we are done then I need to piece the old system back together
**16:52 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747141853439):** no cisctern comms. im not sure how it could be on the PLC side.. its a single message that reads a block of registers
**16:52 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747156138239):** half of them are coming in.. for caballo
**16:52 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747165626919):** im going to get kicked out of this coffee shop at 5
**16:53 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747181205459):** i could wrap up in the car if we are close
**16:53 [Kevin](https://slack.com/archives/C09D358F91R/p1767747182168789):** Ok we are done then
**16:54 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747298788789):** im not sure what changed, but registers 10-19 stopped returning values
**17:00 [Mason Radke](https://slack.com/archives/C09D358F91R/p1767747654710579):** i heard wrong, i have until 6:30 here!