Clients/GQ3/slack/2026/02/2026-02-24_google.md

# #google — 2026-02-24 **07:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771947338973129):** let me konw when you are ready to work on this. im available **07:46 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948017208499):** omw to goleta **07:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948022845709):** k **07:48 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948127381679):** You can start assigning priorities. I have 10 minutes before my 8am if ypu want to call **07:49 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948177868549):** this is going through the spreadsheet and verifying alarm priority settings? do we also want to change the pipeline to the new one with the splitter? **07:49 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948198820889):** also, i had a bit of trouble identifying the tags in ignition for some of the items in the spreadsheet **07:50 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948209169929):** may need to work together a little bit ont hat **07:50 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948227476179):** Yes. **07:50 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948242956869):** ok **07:50 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948254882579):** does 9am work **07:51 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948260909129):** yes **09:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771952957902919):** traffic was bad today. At my desk now. **09:09 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771952965620089):** k **09:09 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771952974384899):** let me switch gears.. **09:11 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771953074060939):** I am added a path example for each category **09:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953595753559):** ok, lets start with just one.. your <mailto:renoh@google.com|renoh@google.com> account. You would like calls, text, push for P0 alarms. Emails for all severities **09:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953602376149):** i see some new tag information there, that will be helpful **09:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953643950999):** wait, calls also for P1 **09:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953645451029):** ? **09:20 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771953655364699):** Yes. P1 for myself and DJ eventually. **09:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771953666654419):** Or now if possible. **09:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953681514749):** ok, let me come up with a plan for that. **09:39 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954764515809):** number plz **09:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954780932579):** going to try to use my account.. standby **09:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954795756469):** yes.. im in.. im good **09:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954796500009):** thanks **09:42 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954920222639):** ok **09:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954928195389):** a plan is coming together. **09:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954930984739):** will be testing soon **09:42 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954944844129):** Did you try to access facilityquantum@gmail? **09:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954962806649):** yes, i first tired to log in to signl4 with it. which is why you got the 2fa **09:43 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954997947519):** ohh ok **09:43 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771955016372269):** Just wondering if my technician neeeded to get ir. Thanks for confirming it was you. **10:01 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771956091603729):** is it ok if DJ gets test calls? or should we test with just me and you before we go live **10:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771956931286009):** i removed DJ for now. about to test a P1 alarm, im not sure if we will get double notifications or not.. so lets see how this goes **10:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771956934674189):** it should only alert me and you **10:16 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957012882359):** I got calls and texts on both phones :+1: **10:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957035447359):** yeah, i think that was just about perfect. i want to have it show up with the property category in signl4.. but thats just a visual detail **10:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957113883319):** Seemed to be. In a meeting until 11. **10:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957122479539):** I can text **10:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957126797699):** perfect. **10:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957160132419):** ok, so you and DJ will get calls,text,push, and email for P0 and P1. **10:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957177050769):** emails only for P2. P3/P4 will be only shown on ignition **10:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957199248589):** does that sound right? **10:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957265264529):** Yes. **10:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957367922249):** excellent. the other 4 users will not get calls at all. but text/push/email for only P0 alarms? am i reading that right? **10:24 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957462977129):** Yes **10:44 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771958652858879):** ok, i think we have this all setup. **10:53 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959199497889):** Great. Were you able to add those alarma to the new P0? **10:53 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959211031239):** going through them now **10:57 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959468547919):** ![[F0AGQ0J72RZ_image.png]] **10:58 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959483600699):** for these, is it the LOLO that is P0? which of the 4 process alarms should i use **10:59 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959563683889):** HIHI **10:59 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959576965089):** It is hazardous gas detection. **10:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959581469029):** makes sene **11:01 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959719052609):** its not clear which tags to use fro sensor 2 / sensor 3 **11:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959737277949):** Cl2_abatement? **11:02 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959745153299):** All of the ones in that folder the HIHI are P0. **11:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959747949509):** HF_abatement **11:02 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959766734699):** I honestly have no idea why the BMS guy went with those names. **11:03 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959793617369):** ![[F0AHQMP3ZS4_Screenshot_2026-02-24_at_11.02.59_AM.png]] **11:03 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959799499209):** HiHi for all of the tags here? **11:04 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959875370929):** yes **11:12 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771960374594709):** I need to power cycle that controller. It keeps losing ModbusTCP connection. Maybe we will add that as a task for you to address with Ignition. **11:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960519077089):** modbus TCP locking up? **11:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960522884419):** or dropping out? **11:15 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771960550659979):** dropping as a device. **11:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960594444149):** interesting. if power cycling the control fixes it, i wonder if the problem is in the modbus TCP service in the controller firmware **11:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960853727059):** if existing UDTs or alarms have an alarm priority of Critical, they will go out over the P0 pipeline. theres a chance we will have to do a little clean if alarms come through that we dont want notifications for.. but that will be easy **11:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961180280819):** unless you want me to set the UDTs all to something low, like P4 and then manually set the just the alarms in the list. we can ensure that we are only notified on alarms in the list **11:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961196956699):** let me know.. that would be more work, but not terrible. **11:28 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961326578819):** If existing are set to critical but not listed as P0, they are likely P1. It is fine if they go out as P0 for now and we can address as needed. **11:28 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961338617239):** k **11:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961369863309):** Are you done with P0? **11:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961375565449):** no not yet **11:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961379338879):** not a fast process. **11:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961394842159):** and i need to go back and change the pipeline.. i only set severity on the first pass **11:32 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961572917019):** All good. Just checking if you need more input **11:32 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961578748119):** so far so good **11:33 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961592171999):** spreadsheet is making more sense as i get a better understanding of things **11:33 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961627510439):** There will be a faster way to do other alarm priorities in mass utilizing JSON files. I want to stick to manual for P0 **11:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961674754719):** yes. good. and possibly with UDT changes if things are consistent enough.. might be faster to update the UDT and override the outliers **11:58 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771963085040059):** I believe when you update the UDT, it does not change exceptions. I think you are right though. The bulk of the pipeline settings per alarm can be updated changeing the UDT. The priorities will still have to be set correctly per alarm. We can likely set most to P2 or P3, but I need to review first. **11:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771963144944679):** i actually really like the JSON idea as well.. im making a batch of modifcations right now as a test.. (i saved the existing tag list, and also made a gateway backup just in case) **11:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771963172147809):** between all these methods we can get it dialed in no problem **12:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964164682269):** @Reno Hiltermann can you confirm that alarm is valid and not something i am working on? **12:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964537768659):** It is what you are working on. It cannot be real, because that is the controller that is diaconnected. **12:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964555814149):** ok. let me look **12:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964847336779):** I checked locally, it is all good. **12:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964857851269):** Like there is no real alarm. **12:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964862870429):** ok good. **12:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964874051569):** i thnk we're all good **12:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964952747659):** ![[F0AGTK2PABX_image.png]] **12:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964966508639):** the generator running alarm has a second alarm added using a pipeline called JLL **12:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964974667199):** keep that as is? remove? **12:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964988852379):** Remove. **12:30 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771965001584899):** JLL is doing there own alarming now through WebCTRL **12:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965021877779):** gotcha **12:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965263877459):** ![[F0AGV1FUFE2_image.png]] **12:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965271797639):** low voltage alarms.. remove this added alarm? **12:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965283438049):** and is it low or low low we want to set to P0? **12:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771965301761789):** Leave those for now. **12:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771965316371169):** Lowlow **12:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965329328649):** k **12:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965586991699):** ignore for now? **12:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965587189399):** ![[F0AGQN7C8D9_image.png]] **12:41 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965714642609):** ![[F0AHRCUDR7S_image.png]] **12:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965724523129):** and also are the P0 statuses Hi Hi or Low Low here **12:47 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771966043871489):** Both on EF (exhaust fans) that mantain differential pressure. **12:48 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771966081894649):** Ignore pumps. Basically the flow and differential pressure already monitor the pumps. **12:48 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771966128819129):** copy **13:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771967864770549):** P0 is done, going to analyze the the taglist in json format and put together a table of all P0 alarms and the pipelines they use for our confirmation. **13:19 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771967988886479):** Awesome. **13:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968584034419):** Feel free to plug anything necessary into Gemini. None of this is confidential or export controlled. I already checked. **13:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968595252339):** excellent.. thank you. **13:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968610755399):** hitting a wall with the tag export since there are so many tags **13:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968612860599):** its timing out. **13:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968623648929):** its a known issue.. there is a scripting work around to export all the tags.. **13:31 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968678271909):** Idk if it is a network issue. I am not entirely sure how the Server to VM on the server connection works. **13:31 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968688634129):** ahh **13:31 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968693504379):** 22,000 tags.. designer only give it 30 seconds before it quits apparently **13:32 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968745246989):** Lol. There is some that need to be culled for old BACnet connections. I am hesitant to delete before I am sure we will not go back... **13:32 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968762170749):** is there a folder that has a lot of irrelevant tags? i could ignore that one **13:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968851646339):** nevermind.. closed and reopened designer **13:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968855135219):** and it was able to export **13:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968856190439):** pssht **13:34 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968859097099):** OK **13:36 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968964460539):** FFU folders and Hepa Monitor. Also any OBJECTS subfolder. Those hold BACnet objects and are mostly bypassed with a data aggregator, which is labeled FX80 on the device list. **13:36 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968997482949):** That is also why a majority of the devices are now in a disabled state. **13:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969017944429):** gtocha **13:37 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969030866729):** we're cooking now that i have the taglist.. lets see what we can do **13:38 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969089002569):** Want to meet at 2 to go over the graphics idea? **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969100672079):** 83 critical alarms. **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969103981279):** yeah sure **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969131400819):** [[F0AHRQ2UNGY_Critical_Alarms.xlsx]] **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969136853809):** this is useful. there is some clean up we can still do for sure. **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969205478719):** if you filter on items that do not use the signl4 pipeline, we can decide what we want to do with those items **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969235068919):** ![[F0AH14S1J8L_Screenshot_2026-02-24_at_1.40.19_PM.png]] **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969242069869):** not too bad **13:40 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969249900889):** Can you add this into a sheet in the shared document **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969253580389):** yes **13:42 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969326469099):** is item 48 a UDT? **13:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969355017419):** yes i think its getting that from the UDT **13:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969370575769):** let me get this on gsheets so we can collab **13:51 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969870155719):** sent invite for the sheet to your email **13:51 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969904412899):** ok **13:55 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970139358209):** made notes in column H **13:56 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970161090849):** perfect! **13:56 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970163836849):** i'll investigate 48 **14:06 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970770370159):** Are you on backup server? **14:06 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970779111599):** yes **14:06 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970792282789):** Let's see what happens if I RDP locally **14:06 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970797243329):** ready? **14:06 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970798906939):** ya **14:07 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970824330129):** session hijack **14:07 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970832562269):** ok hold on **14:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970940830459):** I sent you the code. On Chrome RDP web page select remote support **14:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970951076859):** Connect to Another computer **14:16 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971385207119):** I am off. Should be able to get back in **14:16 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971400975499):** I am setting up the new programming laptop today. **14:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971416907459):** excellent. **14:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971422803799):** let me make sure i can log back in **14:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971502876209):** hm.. **14:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971513791539):** black screen.. ctrl alt delete doesnt give me the login window **14:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971535281649):** swap monitor? **14:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971549283769):** thats another thing, doesnt show second screen **14:19 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971561541359):** hmmm **14:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971567223699):** ![[F0AHAM1616V_image.png]] **14:20 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971625366899):** close chrome **14:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971696787849):** oh duh. ok. i found it **14:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971705077329):** it was the second monitor thing but had to enable the tab again **14:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971705354459):** ok **14:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971711729059):** ahh **14:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971724482369):** Chrome RDP.... is meh **14:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971729019139):** ya **14:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971924745939):** https://docs.google.com/spreadsheets/d/1PJSfFslNz9Cu0VA_7sP9aua8U3QoMMa356RTStNrZuY/edit?gid=1243151636#gid=1243151636 **14:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971928884219):** just putting this here for my notes **14:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972519223549):** i emailed a link to a new spreadsheet with all the alarms.. so you can filter and sort by severity and pipeline, etc. **14:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972525810969):** this gives is a great overview of every alarm in the system **14:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972532819269):** (as it currently stands) **14:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972562358619):** https://docs.google.com/spreadsheets/d/10Tfk8Ht6iRGUdSZ9wC-bPf0Ujo4zk_yZkWt_wN4zytA/edit?gid=1461698963#gid=1461698963 [All_Alarms](https://autosys-workspace.slack.com/files/U0AG898GZDF/F0AGGD4M4JK/all_alarms) **14:39 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771972779225409):** This seems oddly low. I wonder if I disabled a lot.. **14:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972823792369):** its very possible the extraction didnt grab everything. **14:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972827610749):** let me see if i can verify somehow **14:40 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771972856457919):** LMS and FFU are definitely not there. Were you able to exclude those? **14:41 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972872375059):** let me look **14:41 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771972907792629):** Also, lows and highs will be alarms but lower priority depending on equipment. **14:46 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973170804209):** Found the issue. The LMS tags are *UDT instances* (e.g., `typeId: BACNET_SIMPLE_ANALOG`) but they don't have `alarms` defined directly on them — they *inherit* alarms from their UDT type definitions in the `_types_` folder. My previous extraction only caught alarms explicitly present on each tag. Let me now do a full audit of every UDT type's alarms and resolve inheritance across all instances. Map UDT type alarm definitions and count all inherited alarms That's the missing piece — 2*,965 inherited alarms* from UDT type definitions that weren't being captured. Now let me also check for instance-level overrides (where an instance explicitly redefines an alarm) to avoid double-counting, then build the complete spreadsheet. **14:47 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771973248326629):** That sounds correct. Now you see my confusion **14:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973254644389):** haha yep **14:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973273777809):** it also explained why some of these alarms are in error.. they are missing severity entirely **14:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973276510849):** looking into this **14:52 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771973575916289):** Ok **14:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973967485309):** actually its not a severity thing, its an expression thing on the debounce alarms for digitals **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974128473209):** ![[F0AGGH7KCA3_image.png]] **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974136280129):** missing value source expression on the debounce tag **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974138531309):** this should fix it **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974152067169):** it will look at the input source and apply time filtering **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974157676649):** im sure this was the intended purpose **15:03 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974193886049):** yep, things are much happier **15:09 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974552719899):** https://docs.google.com/spreadsheets/d/1SacfN6PzKUtGzyCRblclpfSRRZb0l3ybVToylL38SsQ/edit?usp=sharing [All_Alarms_Updated](https://autosys-workspace.slack.com/files/U0AG898GZDF/F0AHALFDW3T/all_alarms_updated) **15:10 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974624361409):** let me know if this link gives you edit access **07:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771947338973129):** let me konw when you are ready to work on this. im available **07:46 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948017208499):** omw to goleta **07:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948022845709):** k **07:48 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948127381679):** You can start assigning priorities. I have 10 minutes before my 8am if ypu want to call **07:49 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948177868549):** this is going through the spreadsheet and verifying alarm priority settings? do we also want to change the pipeline to the new one with the splitter? **07:49 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948198820889):** also, i had a bit of trouble identifying the tags in ignition for some of the items in the spreadsheet **07:50 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948209169929):** may need to work together a little bit ont hat **07:50 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948227476179):** Yes. **07:50 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948242956869):** ok **07:50 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771948254882579):** does 9am work **07:51 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771948260909129):** yes **09:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771952957902919):** traffic was bad today. At my desk now. **09:09 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771952965620089):** k **09:09 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771952974384899):** let me switch gears.. **09:11 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771953074060939):** I am added a path example for each category **09:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953595753559):** ok, lets start with just one.. your <mailto:renoh@google.com|renoh@google.com> account. You would like calls, text, push for P0 alarms. Emails for all severities **09:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953602376149):** i see some new tag information there, that will be helpful **09:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953643950999):** wait, calls also for P1 **09:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953645451029):** ? **09:20 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771953655364699):** Yes. P1 for myself and DJ eventually. **09:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771953666654419):** Or now if possible. **09:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771953681514749):** ok, let me come up with a plan for that. **09:39 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954764515809):** number plz **09:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954780932579):** going to try to use my account.. standby **09:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954795756469):** yes.. im in.. im good **09:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954796500009):** thanks **09:42 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954920222639):** ok **09:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954928195389):** a plan is coming together. **09:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954930984739):** will be testing soon **09:42 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954944844129):** Did you try to access facilityquantum@gmail? **09:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771954962806649):** yes, i first tired to log in to signl4 with it. which is why you got the 2fa **09:43 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771954997947519):** ohh ok **09:43 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771955016372269):** Just wondering if my technician neeeded to get ir. Thanks for confirming it was you. **10:01 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771956091603729):** is it ok if DJ gets test calls? or should we test with just me and you before we go live **10:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771956931286009):** i removed DJ for now. about to test a P1 alarm, im not sure if we will get double notifications or not.. so lets see how this goes **10:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771956934674189):** it should only alert me and you **10:16 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957012882359):** I got calls and texts on both phones :+1: **10:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957035447359):** yeah, i think that was just about perfect. i want to have it show up with the property category in signl4.. but thats just a visual detail **10:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957113883319):** Seemed to be. In a meeting until 11. **10:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957122479539):** I can text **10:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957126797699):** perfect. **10:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957160132419):** ok, so you and DJ will get calls,text,push, and email for P0 and P1. **10:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957177050769):** emails only for P2. P3/P4 will be only shown on ignition **10:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957199248589):** does that sound right? **10:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957265264529):** Yes. **10:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771957367922249):** excellent. the other 4 users will not get calls at all. but text/push/email for only P0 alarms? am i reading that right? **10:24 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771957462977129):** Yes **10:44 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771958652858879):** ok, i think we have this all setup. **10:53 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959199497889):** Great. Were you able to add those alarma to the new P0? **10:53 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959211031239):** going through them now **10:57 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959468547919):** ![[F0AGQ0J72RZ_image.png]] **10:58 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959483600699):** for these, is it the LOLO that is P0? which of the 4 process alarms should i use **10:59 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959563683889):** HIHI **10:59 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959576965089):** It is hazardous gas detection. **10:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959581469029):** makes sene **11:01 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959719052609):** its not clear which tags to use fro sensor 2 / sensor 3 **11:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959737277949):** Cl2_abatement? **11:02 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959745153299):** All of the ones in that folder the HIHI are P0. **11:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959747949509):** HF_abatement **11:02 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959766734699):** I honestly have no idea why the BMS guy went with those names. **11:03 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959793617369):** ![[F0AHQMP3ZS4_Screenshot_2026-02-24_at_11.02.59_AM.png]] **11:03 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771959799499209):** HiHi for all of the tags here? **11:04 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771959875370929):** yes **11:12 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771960374594709):** I need to power cycle that controller. It keeps losing ModbusTCP connection. Maybe we will add that as a task for you to address with Ignition. **11:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960519077089):** modbus TCP locking up? **11:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960522884419):** or dropping out? **11:15 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771960550659979):** dropping as a device. **11:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960594444149):** interesting. if power cycling the control fixes it, i wonder if the problem is in the modbus TCP service in the controller firmware **11:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771960853727059):** if existing UDTs or alarms have an alarm priority of Critical, they will go out over the P0 pipeline. theres a chance we will have to do a little clean if alarms come through that we dont want notifications for.. but that will be easy **11:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961180280819):** unless you want me to set the UDTs all to something low, like P4 and then manually set the just the alarms in the list. we can ensure that we are only notified on alarms in the list **11:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961196956699):** let me know.. that would be more work, but not terrible. **11:28 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961326578819):** If existing are set to critical but not listed as P0, they are likely P1. It is fine if they go out as P0 for now and we can address as needed. **11:28 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961338617239):** k **11:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961369863309):** Are you done with P0? **11:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961375565449):** no not yet **11:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961379338879):** not a fast process. **11:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961394842159):** and i need to go back and change the pipeline.. i only set severity on the first pass **11:32 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961572917019):** All good. Just checking if you need more input **11:32 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961578748119):** so far so good **11:33 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961592171999):** spreadsheet is making more sense as i get a better understanding of things **11:33 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771961627510439):** There will be a faster way to do other alarm priorities in mass utilizing JSON files. I want to stick to manual for P0 **11:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771961674754719):** yes. good. and possibly with UDT changes if things are consistent enough.. might be faster to update the UDT and override the outliers **11:58 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771963085040059):** I believe when you update the UDT, it does not change exceptions. I think you are right though. The bulk of the pipeline settings per alarm can be updated changeing the UDT. The priorities will still have to be set correctly per alarm. We can likely set most to P2 or P3, but I need to review first. **11:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771963144944679):** i actually really like the JSON idea as well.. im making a batch of modifcations right now as a test.. (i saved the existing tag list, and also made a gateway backup just in case) **11:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771963172147809):** between all these methods we can get it dialed in no problem **12:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964164682269):** @Reno Hiltermann can you confirm that alarm is valid and not something i am working on? **12:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964537768659):** It is what you are working on. It cannot be real, because that is the controller that is diaconnected. **12:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964555814149):** ok. let me look **12:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964847336779):** I checked locally, it is all good. **12:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964857851269):** Like there is no real alarm. **12:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964862870429):** ok good. **12:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964874051569):** i thnk we're all good **12:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964952747659):** ![[F0AGTK2PABX_image.png]] **12:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964966508639):** the generator running alarm has a second alarm added using a pipeline called JLL **12:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771964974667199):** keep that as is? remove? **12:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771964988852379):** Remove. **12:30 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771965001584899):** JLL is doing there own alarming now through WebCTRL **12:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965021877779):** gotcha **12:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965263877459):** ![[F0AGV1FUFE2_image.png]] **12:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965271797639):** low voltage alarms.. remove this added alarm? **12:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965283438049):** and is it low or low low we want to set to P0? **12:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771965301761789):** Leave those for now. **12:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771965316371169):** Lowlow **12:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965329328649):** k **12:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965586991699):** ignore for now? **12:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965587189399):** ![[F0AGQN7C8D9_image.png]] **12:41 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965714642609):** ![[F0AHRCUDR7S_image.png]] **12:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771965724523129):** and also are the P0 statuses Hi Hi or Low Low here **12:47 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771966043871489):** Both on EF (exhaust fans) that mantain differential pressure. **12:48 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771966081894649):** Ignore pumps. Basically the flow and differential pressure already monitor the pumps. **12:48 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771966128819129):** copy **13:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771967864770549):** P0 is done, going to analyze the the taglist in json format and put together a table of all P0 alarms and the pipelines they use for our confirmation. **13:19 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771967988886479):** Awesome. **13:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968584034419):** Feel free to plug anything necessary into Gemini. None of this is confidential or export controlled. I already checked. **13:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968595252339):** excellent.. thank you. **13:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968610755399):** hitting a wall with the tag export since there are so many tags **13:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968612860599):** its timing out. **13:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968623648929):** its a known issue.. there is a scripting work around to export all the tags.. **13:31 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968678271909):** Idk if it is a network issue. I am not entirely sure how the Server to VM on the server connection works. **13:31 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968688634129):** ahh **13:31 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968693504379):** 22,000 tags.. designer only give it 30 seconds before it quits apparently **13:32 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968745246989):** Lol. There is some that need to be culled for old BACnet connections. I am hesitant to delete before I am sure we will not go back... **13:32 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968762170749):** is there a folder that has a lot of irrelevant tags? i could ignore that one **13:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968851646339):** nevermind.. closed and reopened designer **13:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968855135219):** and it was able to export **13:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771968856190439):** pssht **13:34 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968859097099):** OK **13:36 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968964460539):** FFU folders and Hepa Monitor. Also any OBJECTS subfolder. Those hold BACnet objects and are mostly bypassed with a data aggregator, which is labeled FX80 on the device list. **13:36 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771968997482949):** That is also why a majority of the devices are now in a disabled state. **13:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969017944429):** gtocha **13:37 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969030866729):** we're cooking now that i have the taglist.. lets see what we can do **13:38 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969089002569):** Want to meet at 2 to go over the graphics idea? **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969100672079):** 83 critical alarms. **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969103981279):** yeah sure **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969131400819):** [[F0AHRQ2UNGY_Critical_Alarms.xlsx]] **13:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969136853809):** this is useful. there is some clean up we can still do for sure. **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969205478719):** if you filter on items that do not use the signl4 pipeline, we can decide what we want to do with those items **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969235068919):** ![[F0AH14S1J8L_Screenshot_2026-02-24_at_1.40.19_PM.png]] **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969242069869):** not too bad **13:40 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969249900889):** Can you add this into a sheet in the shared document **13:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969253580389):** yes **13:42 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969326469099):** is item 48 a UDT? **13:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969355017419):** yes i think its getting that from the UDT **13:42 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969370575769):** let me get this on gsheets so we can collab **13:51 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771969870155719):** sent invite for the sheet to your email **13:51 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771969904412899):** ok **13:55 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970139358209):** made notes in column H **13:56 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970161090849):** perfect! **13:56 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970163836849):** i'll investigate 48 **14:06 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970770370159):** Are you on backup server? **14:06 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970779111599):** yes **14:06 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970792282789):** Let's see what happens if I RDP locally **14:06 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970797243329):** ready? **14:06 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970798906939):** ya **14:07 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771970824330129):** session hijack **14:07 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970832562269):** ok hold on **14:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970940830459):** I sent you the code. On Chrome RDP web page select remote support **14:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771970951076859):** Connect to Another computer **14:16 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971385207119):** I am off. Should be able to get back in **14:16 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971400975499):** I am setting up the new programming laptop today. **14:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971416907459):** excellent. **14:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971422803799):** let me make sure i can log back in **14:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971502876209):** hm.. **14:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971513791539):** black screen.. ctrl alt delete doesnt give me the login window **14:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971535281649):** swap monitor? **14:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971549283769):** thats another thing, doesnt show second screen **14:19 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971561541359):** hmmm **14:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971567223699):** ![[F0AHAM1616V_image.png]] **14:20 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971625366899):** close chrome **14:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971696787849):** oh duh. ok. i found it **14:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971705077329):** it was the second monitor thing but had to enable the tab again **14:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971705354459):** ok **14:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971711729059):** ahh **14:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771971724482369):** Chrome RDP.... is meh **14:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971729019139):** ya **14:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971924745939):** https://docs.google.com/spreadsheets/d/1PJSfFslNz9Cu0VA_7sP9aua8U3QoMMa356RTStNrZuY/edit?gid=1243151636#gid=1243151636 **14:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771971928884219):** just putting this here for my notes **14:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972519223549):** i emailed a link to a new spreadsheet with all the alarms.. so you can filter and sort by severity and pipeline, etc. **14:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972525810969):** this gives is a great overview of every alarm in the system **14:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972532819269):** (as it currently stands) **14:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972562358619):** https://docs.google.com/spreadsheets/d/10Tfk8Ht6iRGUdSZ9wC-bPf0Ujo4zk_yZkWt_wN4zytA/edit?gid=1461698963#gid=1461698963 [All_Alarms](https://autosys-workspace.slack.com/files/U0AG898GZDF/F0AGGD4M4JK/all_alarms) **14:39 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771972779225409):** This seems oddly low. I wonder if I disabled a lot.. **14:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972823792369):** its very possible the extraction didnt grab everything. **14:40 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972827610749):** let me see if i can verify somehow **14:40 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771972856457919):** LMS and FFU are definitely not there. Were you able to exclude those? **14:41 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771972872375059):** let me look **14:41 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771972907792629):** Also, lows and highs will be alarms but lower priority depending on equipment. **14:46 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973170804209):** Found the issue. The LMS tags are *UDT instances* (e.g., `typeId: BACNET_SIMPLE_ANALOG`) but they don't have `alarms` defined directly on them — they *inherit* alarms from their UDT type definitions in the `_types_` folder. My previous extraction only caught alarms explicitly present on each tag. Let me now do a full audit of every UDT type's alarms and resolve inheritance across all instances. Map UDT type alarm definitions and count all inherited alarms That's the missing piece — 2*,965 inherited alarms* from UDT type definitions that weren't being captured. Now let me also check for instance-level overrides (where an instance explicitly redefines an alarm) to avoid double-counting, then build the complete spreadsheet. **14:47 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771973248326629):** That sounds correct. Now you see my confusion **14:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973254644389):** haha yep **14:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973273777809):** it also explained why some of these alarms are in error.. they are missing severity entirely **14:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973276510849):** looking into this **14:52 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771973575916289):** Ok **14:59 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771973967485309):** actually its not a severity thing, its an expression thing on the debounce alarms for digitals **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974128473209):** ![[F0AGGH7KCA3_image.png]] **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974136280129):** missing value source expression on the debounce tag **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974138531309):** this should fix it **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974152067169):** it will look at the input source and apply time filtering **15:02 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974157676649):** im sure this was the intended purpose **15:03 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974193886049):** yep, things are much happier **15:09 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974552719899):** https://docs.google.com/spreadsheets/d/1SacfN6PzKUtGzyCRblclpfSRRZb0l3ybVToylL38SsQ/edit?usp=sharing [All_Alarms_Updated](https://autosys-workspace.slack.com/files/U0AG898GZDF/F0AHALFDW3T/all_alarms_updated) **15:10 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771974624361409):** let me know if this link gives you edit access **15:17 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771975036378839):** I am on another task for now **15:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771975048658019):** ok, no problem. **15:25 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771975538976439):** Are you doing anything heavy, I need a backup? **15:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771975562375539):** just testing the alarm severity config scripting **15:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771975566116599):** i can switch gears **15:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771975647164119):** All good I got it **15:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771975653661469):** k **15:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771976146536379):** Just wanted to make sure I wasn't going to step on your toes. Ignition should be able to handle it, but I am weary. **15:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771976156643779):** aah i see **15:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771976165510549):** backups are always a good idea **15:57 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771977457559399):** i got all the scripting to work! **15:57 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771977477759289):** and using the tag bindings from the faceplate **15:58 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771977486180579):** just have to replicate for Hi, Lo, and LoLo real quick **16:07 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978030758299):** Great. **16:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978174910149):** ![[F0AGUTMBA4D_Screenshot_2026-02-24_160847.png]] **16:09 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978198353559):** Next big project is creating this in ignition **16:10 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978232247219):** seems easy enough **16:10 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978239392459):** Should be **16:11 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978290979869):** My network engineer just did some wizardry, and we should be hosting on a real Google device shortly. The old server will be converted into a test instance **16:11 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978319940169):** how long before we just ask quantum AI to do all this for us? **16:12 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978344412909):** I am able to go to an internal Google page and see Ignition. You have no idea the meeting I was in to make this happen lo. **16:12 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978346889279):** lol **16:12 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978364576679):** also is gemini going to try to build a competing project for claude code? because. holy crap its the most impressive tool ive used so far **16:13 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978400024799):** I hope the Quantum AI will sit in network security meetings for me... **16:13 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978415784989):** cant wait to see what comes out of it **16:14 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978450054259):** I don't know. You are saying claude code is the best right now? **16:14 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978456537409):** man, it might be **16:14 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978476257549):** i spooled up a prompt that took 50 hours to complete. and i came back to a perfect solution **16:14 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978481298579):** a full server stack **16:14 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978483835489):** and a dozen integrations **16:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978525352339):** full integrated dashboard UI for controls **16:15 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978527225969):** I can neither confirm nor deny that there are Google engineers are asking to use competing models... **16:15 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978539620929):** haha **16:15 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978544620689):** fo nodered? **16:15 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978550026479):** for* **16:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978560125209):** node red wasnt a part of this project. but it does amazing things with node red. **16:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978580141899):** anything linux based since it can read/modify config files and things **16:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978581928509):** seems to do great **16:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978614557869):** i think its power is being able to try something, read the error message it gets, and automatically process that look up a solution, and try again **16:16 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978616472369):** until it works **16:17 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978635934099):** ohh the solution took it 50 hours or your prompt took 50 hours? **16:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978646435419):** for it to build it **16:17 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978651091729):** got it. **16:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978652905119):** granted there were donwloads invovled **16:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978655095739):** that took some time **16:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978658165769):** but lots of work was done **16:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978659526749):** hands off **16:17 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978661978979):** mind blown **16:17 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978663619639):** right **16:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978697097449):** does it handle ignition? I have been interested in Openclaw **16:18 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978707282309):** Want to give it free reign in a test environment **16:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978719649779):** i want to get one running on a linux machine to see how much it can do **16:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978726020769):** i may play with that tonight actually **16:18 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978733687939):** can we test the alarm priority drop downs? **16:19 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978742567529):** specifically the faceplates and tag bindings from the client **16:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978845165849):** ![[F0AGUV6NDKP_image.png]] **16:20 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978851116389):** i loaded a session **16:20 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978853407709):** You should be able to compare right **16:20 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978858630399):** They look good? **16:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978862921349):** it seems to be loading priorities properly **16:21 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978868887049):** yeah.. let me swap a couple **16:21 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978904152139):** Yeah. I clicked through 10 of them and I know the priorities are correct. **16:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978920280159):** excellent.. can you change one and i'll check on the backend **16:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978928802859):** tel me know the tag and alarm and i'll tel you what it changed to **16:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978930025349):** Ok which one **16:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978945812949):** CHW SUPPLY **16:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978966656969):** LARM LO changed to medium **16:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978972616169):** ALARM* **16:22 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771978977431069):** is that flow? **16:22 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978979440059):** from low **16:23 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978985325719):** Temp **16:23 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771978999371959):** CHW SUPPLY TEMP **16:23 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979020450519):** nailed it **16:23 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979022179239):** ![[F0AGYCMB8RG_image.png]] **16:24 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979041546279):** back to low **16:24 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979061629239):** ![[F0AHBA6LX25_image.png]] **16:24 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979066365619):** yep **16:24 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979090709329):** So on the graphic you edited, go back into play, and leave it on SETTINGS **16:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979111570699):** done **16:25 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979113147969):** Otherwise they all open directly to ALARMS **16:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979117254879):** ah **16:25 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979120387939):** fixed **16:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979139102519):** we can make an onload script that uses tab 0 or wahtever its called **16:25 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979156027459):** but this is fine if it works **16:25 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979157490879):** Yeah, its not that important. **16:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979160372909):** ya **16:26 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979179934619):** These views look great on mobile too. **16:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979189029019):** nice **16:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979207822139):** we may want to do a couple more alarm tests. with P0 and P1.. i made some significant changes **16:26 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979217051419):** for notifications **16:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979231639589):** Yes. There will be a final test scheduled once everyone is added. **16:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979236245709):** ok **16:27 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979243182369):** We should do more teating before if needed. **16:27 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979276969449):** let me just trigger my test alarm maybe? i'll set it to P0 then P1... we should get calls for both **16:28 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979296118539):** Are these going to everyone? **16:28 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979310806199):** let me look **16:28 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979335131829):** Have Ganesh and Pavel joined? Those are the big shots **16:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979350575149):** no, neither of them **16:29 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979368702359):** Ok go ahead. I will ping everyone **16:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979379870859):** ![[F0AGWBKN26A_image.png]] **16:29 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979393705169):** P0/P1 Call team is just us and DJ.. but it will also trigger an email to everyone in ignition for P0 **16:30 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979432939569):** What does the alarm say? **16:30 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979443102449):** there is text that says no action needed **16:30 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979451648329):** Ok go ahead **16:33 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979629644869):** call/text? **16:34 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979661249959):** You are clear to send call/text. **16:34 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979666610929):** I did not get anything **16:34 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979678015099):** hm. i did. let me check **16:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979706235349):** oh, you're not on duty **16:35 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979721744679):** i only have your renoh account in there **16:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979747325289):** woops **16:35 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979756159979):** I want both **16:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979760863239):** ok **16:36 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979800556299):** ok, gonna go again **16:38 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771979896856829):** got both **16:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979906907189):** DJ acked it **16:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979908026199):** thats good **16:38 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979912419459):** it works **16:39 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771979955873349):** one more test if thats ok and i'll feel good about the pipeline **16:46 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771980369206259):** ok **16:46 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771980402081679):** got both **16:46 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771980408094399):** yep me too **16:46 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771980409074019):** all good **16:47 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771980479866749):** ok, i need to take care of a service call.. think we're good for today? **16:48 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771980494171499):** yessir **16:48 [Reno Hiltermann](https://slack.com/archives/C0A56N14A5S/p1771980507098969):** thanks **16:48 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771980513926189):** excellent. lets talk tomorrow, let me know whats next. **16:48 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771980531616669):** the full alarm list is in that gsheet i last linked. if you want to sort by priorities and pipelines **16:48 [Mason Radke](https://slack.com/archives/C0A56N14A5S/p1771980534209409):** for any changes or updates