| site |
Client Plant |
Buellton |
100% |
Client: Buellton |
| site |
Res 3 Booster |
Res 3 Booster |
100% |
Res 3 Booster = 23 |
| site |
Reservoir 1 & 2 / W9 |
Reservoir 1 & 2 / W9 |
100% |
Reservoir 1 & 2 / W9 = 20 |
| site |
McMurray WTP |
McMurray WTP |
100% |
McMurray WTP = 25 |
| site |
Reservoir 3 |
Reservoir 3 |
100% |
Reservoir 3=5 |
| system |
SCADA System |
SCADA PC |
90% |
Use a ethernet serial server between the SCADA PC and the radio |
| task |
Program Well 9 |
Program Well 9 for control and comm with Res 1/2 |
90% |
6) Program Well 9 for control and comm with Res 1/2 |
| task |
Program McMurray |
Program McMurray for control and comm with Res 1/2 |
90% |
7) Program McMurray for control and comm with Res 1/2 |
| task |
Cut over Res 1/2, Well 9, and McMurray |
Cut over Res 1/2, Well 9, and McMurray |
90% |
8) Cut over Res 1/2, Well 9, and McMurray |
| task |
Equipment Install |
Install radios at Res 3, Booster, McMurray; install PC, radio, ethernet/serial server, and power supply at the office |
90% |
Install radios at Res 3, Booster, McMurray; Install PC, radio, ethernet/serial server |
| task |
Establish Comm |
Establish communication between devices |
90% |
2) Establish Comm |
| task |
Configure SCADA |
Configure SCADA system |
90% |
3) Configure SCADA |
| task |
Program Booster |
Program Booster to talk to Res 3 for level control |
90% |
4) Program Booster to talk to Res 3 for level control |
| task |
Cut over Res 3 and Booster |
Cut over Res 3 and Booster to new SCADA |
90% |
5) Cut over Res 3 and Booster to new SCADA |