Clients/Laguna/evernote/Network_Work_Log.md

# Network Work Log 220609 Added a SCANS folder to the Public folder on ScadaServer2018. Added a shortcut to it on the scanner, and on the Operator computer. User login is network2. Work was done to move office network to the new building and to add a firewall and router, and new wireless access points, but no entry was made. 220301 Setup new PeakWifi internet service Updated router firmware 210119 WIMS server disk was full from backups. Deleted all old backups. Applied Windows updates to SCADASERVER2018 210111 More problems with SQL using up memory on the host server. Installed windows updates Setup iLO static IP and login  200921 Adding a new VM for the new WIMS Check WIMS Log notebook for details Updated Netgear router firmware Turned off guest account 200731 Upgraded the firmware in Cisco switch to v1.4.11.5  Getting ready to create VLans.  Need to add a NIC to SCADA1b before VLAN  Organized switch ports  200424 Couldn't log on to SCADASERVER2018 through remote desktop. Had to hard reset the server. Memory usage is still running at 85%. Loweres SQL max memory to 2048.  Probably should upgrade the memory. Made more space on the backup drive. 191204 Historian2018 is real slow. Both Historian2018 and WIMS servers are down to 1024 MB ram. Found SCADAServer2018 memory is 84% used with SQL server using 6GB. SQL was installed with Wonderware when I was trying to move Win911 to the server. Set max memory usage of SQL to 3500 MB using method described online . Performed windows updates on Historian2018  191113 Lab PC lost printer again. Logged into admin account logged into Scadaserver2018 through Files The printer should come up with the shared folder. Right click and connect  190708 WIMS and JOBCAL having problems. Found C drive on WIMS server was full from WIMS backups. Last deletion of backup files was in Feb. This will be an issue about every 6 months. 190514 More network issues. Used Wireshark and found Jesse's computer was causing a broadcast storm with ICMPv6 multicast listener reports.  190424 Added a new wireless AP for the SCADA nodes to connect to. 190214 Created a shortcut to the Historian2018 Scan folder for Jesse 190207 Changed scan folder in TaskAlfa System Menu (Admin/Admin)  Page 2 Edit destination  Address book 0012 Lag San SMB Use the Scan to Folder Setup Tool in Historian2018 instead of the above method  Installed Kyocera software on Historian2018  Goto Command Center [https://km3e6c23](https://km3e6c23/) Scan shared folder is Historian2018\public\scans THERE ARE SOME NETWORK/SERVER SERVICE NOTES IN [Scada work log](evernote:///view/17556707/s161/b96463cf-713a-4dc4-98a3-b0921d15e39e/b96463cf-713a-4dc4-98a3-b0921d15e39e/) 190107 Added Jeremy and network domain users.  Modified new Historian reports  Jeremy's remote desktop login won't work on the new server.  Setup the Public folder on Historian2018 for sharing 181104 Reloaded firmware into Advantech radio 181202 Turned off SSID broadcast of the SCADA wireless network Rebooted the AP and the two SCADA Clients There is intermittent loss of comms. The AP log was showing some other client that was being associated then disassociated. As well as the known clients. The reboot seems to have fixed this. 181023 Changed ending DNS address to 80 from 69 to add more addresses Added Laguna_Guest Wi-Fi  Backed up netgear router settings to SCADA2B 180921 Changed router DNS to 1.1.1.1 from 99.106.99.99 and updated router firmware